Palm Plantation Captive Power Plant Boiler

 
Strategic cooperation with the Chinese key lab (biomass combustion test), biomass boiler R&D institute and manufacturers, we make testing for combustion characteristic and design different kind of boilers according to different fuels.


Biomass boiler fuel feeding system has been a problem such as conveying system output is not enough for the boiler consumption, feeding system jam, the fuel cannot be fed into the boiler stably, silo problem, etc. Our company invented a special technology and effectively solved the above problem.

Palm empty fruit bunches (after palm fruit threshing) with diameter ¢300~600mm, the center rod ¢40~100mm, 55% water content, containing a variety of salts, including chlorides, also with lower ash fusion point. According to these characteristics, we have adopted joint grate (the reciprocating grate plus chain grate) combustion boiler. The water content of the empty fruit bunches can be reduced to less than 25% after the dehydration machine. The center rod is wholly smashed and sent to the fuel bunker through conveyor without further crushing, and then forced into the feeding outlet of boiler by feeders. The fuel is pre-heated on the reciprocating grate and then fully combusted on the chain grate after drying out.

SOMEC will select the most suitable type of boiler according to each fuel characteristics and the mixing proportion.

Proposal 1: Fuel of Palm Waste


Proposal 2: Fuel of Palm Waste + Biogas